Wall Mounted VRF Unit - CE Certified Gold Fin Residential Commercial HVAC
The wall-mounted unit that installs like a ducted system and looks like one, featuring 30mm top-flush mounting, 27 dB(A) sound floor, and triple-vector drainage to eliminate traditional wall-mounted compromises.
Product Overview
Wall-mounted units have historically been the "last resort" option—chosen when ceiling access is impossible and aesthetics are sacrificed for functionality. The Midea V8 Wall Mounted overturns that assumption entirely. A re-engineered heat exchanger geometry enables top-flush mounting with just 30 mm clearance from the ceiling—eliminating the unsightly gap that collects dust and undermines the room's visual continuity. The result is a wall-mounted unit that looks as intentional and integrated as a concealed ducted installation.
At 27 dB(A) minimum sound level, the unit operates below the ambient noise floor of most residential and hospitality environments—making it virtually inaudible during sleeping hours. The bidirectional Coanda effect intelligently routes air: ceiling-hugging in cooling mode to prevent cold downdrafts, and wall-following in heating mode to deliver warmth to floor level where occupants actually feel it. Combined with mmWave occupancy sensing and unrestricted drainage routing (horizontal, downward, or upward—plus optional pumped lift), this is the wall-mounted unit that designers no longer need to apologize for specifying.
As part of the V8 heat pump VRF platform, the Wall Mounted provides all-season climate control through reverse-cycle cooling and heating. Individual zone control lets each room maintain its own setpoint independently—critical for hotel VRF solutions where guest room climate control must balance comfort with energy conservation. The DC inverter compressor's variable speed operation delivers energy saving up to 40% versus conventional systems.
Core Features & Benefits
27 dB(A) Ultra-Quiet Operation
At minimum fan speed, the unit produces just 27 decibels—quieter than a whisper in a library. This acoustic benchmark makes it ideal for sleeping quarters, patient rooms, and environments where HVAC noise impacts occupant satisfaction.
30mm Top-Flush Mounting
Redesigned thermal exchange geometry eliminates the traditional 100+ mm gap between the unit top and ceiling. With only 30 mm clearance required, the unit sits visually flush against the ceiling plane—eradicating dust-collecting ledges and creating clean architectural lines.
Bidirectional Coanda Air Routing
In cooling mode, the Coanda effect adheres the air jet to the ceiling surface, preventing cold drafts from descending into occupied zones. In heating mode, the warm air stream follows the wall surface downward, naturally delivering heat to floor level where human thermal comfort is most sensitive.
mmWave Occupancy-Aware Operation
Integrated radar module detects room vacancy and autonomously transitions to energy-reduction mode; re-entry triggers immediate return to active comfort. This demand-driven approach is valuable in hotel VRF solutions and patient rooms where occupancy is intermittent.
Three-Axis 3D Air Distribution
Simultaneous automatic vertical and horizontal louver actuation creates a three-dimensional air pattern that sweeps conditioned air throughout the room volume—eliminating stagnant pockets and thermal stratification.
Unrestricted Drainage Routing
Unlike conventional wall-mounted units limited to gravity-only drainage, the V8 Wall Mounted supports horizontal, downward, and upward drain paths—plus an optional 1,200 mm high-lift pump. This eliminates major installation constraints in complex building layouts.
Fully Enclosed Acoustic Architecture
Internal components and optional pump adopt sealed enclosures that prevent sound transmission through the unit casing—directly contributing to the 27 dB(A) performance and ensuring consistent acoustic performance.
Dedicated Sleep Protocol
Sleep mode gradually modifies temperature setpoint and fan speed throughout the night cycle—optimizing thermal comfort and energy conservation during hours when occupants cannot adjust settings.
Application Scenarios
| Scenario |
Description |
| Hotel Guest Rooms |
27 dB(A) preserves sleep quality; 30mm flush mount eliminates visual compromise; hotel VRF solution at its most guest-friendly |
| Premium Residential Suites |
Residential-grade aesthetics with commercial VRF efficiency and centralized controllability |
| Hospital Patient Rooms |
Ultra-low sound supports recovery protocols; occupancy radar automates unoccupied setbacks; hospital VRF system integration |
| Senior Living Quarters |
Intuitive wall-level controls; Coanda heating delivers warmth at floor level for elderly comfort |
| Boutique Office Suites |
Clean visual lines without duct infrastructure; flexible drainage adapts to partition layouts; office building VRF versatility |
| School Dormitories |
Reliable, quiet operation for student accommodation; campus air conditioning with individual room control |
Certifications & Standards
• CE Certified – Full European conformity, R32 low GWP refrigerant (GWP 675), F-Gas compliant
• Eurovent – Certified performance data for European market compliance
• TÜV SÜD – Third-party verified safety and performance standards
• SASO Certified – Saudi Arabian standards approval
• ESMA Approved – UAE standardization compliance
• GCC Standard Compliant – Gulf region deployment ready
• ISO 9001 – Quality management ensuring consistent manufacturing quality
• ISO 14001 – Environmental management system for responsible production
• ISO 45001 – Occupational health and safety standards across the product lifecycle
Technical Specifications
| Parameter |
Wall Mounted |
| Capacity Range |
2.2-7.1 kW |
| Minimum Sound Level |
27 dB(A) |
| Top-Flush Clearance |
30 mm minimum |
| Air Distribution |
3D (auto vertical + horizontal sweep) |
| Coanda Routing |
Bidirectional (cooling-to-ceiling / heating-to-wall) |
| Occupancy Radar |
mmWave (auto setback) |
| Drainage Paths |
Horizontal / downward / upward (unrestricted) |
| Optional Pump Head |
1,200 mm |
| Acoustic Design |
Fully enclosed architecture |
| Sleep Protocol |
Supported |
| Pump Fault Feedback |
Supported |
| Bus Communication |
HyperLink, up to 2,000 m |
| Power Architecture |
Independent supply (partial shutdown tolerant) |
| Refrigerant |
R32 low GWP (GWP 675, F-Gas compliant) |
| System Compatibility |
Heat pump VRF / Heat recovery VRF |
| BMS Integration |
Modbus RTU / BACnet compatible |
System Compatibility
Compatible with all V8 series outdoor units via HyperLink arbitrary topology communication. Full BMS integration via Modbus RTU and BACnet protocols.
پیام شما باید بین 20 تا 3000 کاراکتر باشد!
